Bone grafting

Bonefill, Porous & Mix,
Block

Excellent alternative to autogenous and allogenous bone

The mineralized inorganic bone matrix of the Bonefill has a porous macro and micro structure similar to the human cortical and spongy bones. In granulate form, Bonefill Dense, Porous & Mix act as osteoconductive mechanism promoting bone growth and regeneration. With time, the Bonefill is partially remodeled through the action of osteoclasts and osteoblasts, being a viable alternative to autologous bone in defects suitable for its use and indication.

Indications

Bonefill is recommended for filling bone defects and for volumetric increase in the following situations:

  • increase/reconstructions of alveolar crests, filling of post-extraction cavities,
  • filling of cavities produced by post-surgery treatment interventions of cysts,
  • granulomas and other lytic, oral and maxillofacial and dental pathologies,
  • preparation of implant and filling sites of bone dehiscence,
  • besides bone grafts in maxillary sinuses and in the periodontal area it can be used in filling bone defects and to support the membrane during guided bone regeneration.

Topography

The surface helps the absorption of proteins in the Bonefill Porous particles, enabling the efficient adhesion of the osteoblasts. This biological interaction enables a reliable bone formation.

Hydrophilicity

The rapid and complete hydration with blood or saline solution is an important feature of the handling, new bone formation and clinical success. Its strong capillary action allows the rapid and efficient penetration of particles with fluids in the material, nutrients and blood through its three-dimensional network of the trabecular bone, resulting in excellent handling, application and predictability in daily clinical use.

Courtesy by. Dr Danilo Maeda

6 months sinus floor augmentation

Courtesy by. Dr Fábio Mizutani

6 months sinus floor augmentation

Courtesy by. Dr Danilo Maeda

6 months split crest

Properties

  • Material rigin: Femoral heads of cattle.
  • Physicochemical treatment: Chemically treated – Receiving a sequence of baths [3 chemical process steps].
  • Appearance: Whitish up to beige.
  • Structure density:  Controlled Inorganic particles of bovine matrix with high macro and micro porosity having a large inner surface area.
  • Shelf life: 5 years
  • Ca/P 1,67
  • Macroporosity ~65-80%
  • Pore size ~100 – 600 μm
  • Integration time estimated 6 – 9 months
  • Surface area measured by BET ~77,5 m2/g
  • Calcium 27.52%-32.97% w./w.
  • Phosphorous 13.56%-16.28% w./w.

Sticky Bone Bonefill Porous

BONEFILL

The prices do not include VAT

43 EUR16001 Bonefill [0,10- 0,60 mm] Small 0,50cc0,5 g
43 EUR 16024Bonefill [0,60- 1,50 mm] Medium 0,50cc0,5 g
43 EUR 16026 Bonefill [1,50- 2,50 mm] Large 1,00cc0,5 g
101 EUR 16043 Bonefill [0,10- 0,60 mm] Small 2,60cc2,5 g
101 EUR16042 Bonefill [0,60- 1,50 mm] Medium 2,60cc2,5 g

BONEFILL porous

The prices do not include VAT

51 EUR16894 Bonefill Porous [0,10- 0,60 mm] Small 0,75cc0,5 g
51 EUR 16911Bonefill Porous [0,60- 1,50 mm] Medium 1,05cc0,5 g
51 EUR16928 Bonefill Porous [1,50- 2,50 mm] Large 1,45cc0,5 g
101 EUR 16891 Bonefill Porous [0,10- 0,60 mm] Small 1,50cc1,0 g
101 EUR16892 Bonefill Porous [0,60- 1,50 mm] Medium 2,10cc1,0 g
101 EUR16893 Bonefill Porous [1,50- 2,50 mm] Large 3,00cc1,0 g
158 EUR16914 Bonefill Porous [0,60- 1,50 mm] Medium 5,25cc2,5 g

BONEFILL MIX

The prices do not include VAT

56 EUR16955 Bonefill Mix [0,10- 1,50 mm] Small/Medium 0,88cc0,5 g
56 EUR 16964Bonefill Mix [0,60- 1,50 mm] Medium/Medium0,5 g
105 EUR 16965 Bonefill Mix [0,60- 1,50 mm] Medium/Medium1,0 g
169 EUR 16966 Bonefill Mix [0,60- 1,50 mm] Medium/Medium2,5 g

BONEFILL block

The prices do not include VAT

105 EUR16495 Bonefill Block [5 x 10 x 10 mm]0,5 g
132 EUR16498Bonefill Block [5 x 20 x 20 mm]0,5 g
193 EUR16493 Bonefill Block [10 x 10 x 40 mm]1,0 g

synthetic graft
HYDROXYAPATYT

Description

Hydroxyapatite, Ca10(PO4)6(OH)2 is a hydrated calcium phosphate, major component (about 95%) of the mineral phase of human bones and teeth. Used by the body to make up the skeleton due to its capacity to act as a calcium and phosphorus reserve. Due to its chemical similarity with the chemical phase of bone tissues, it is one of the most biocompatible materials known, promoting bone growth in regions where it is found (osteoconductive), establishing chemical bonds between it and the bone tissue (bioactive), allowing the proliferation of fibroblasts, osteoblasts and other bone cells, which are not different from the bone surface indicating a high surface chemical similarity.

Indications

The hydroxyapatite-based biomaterials have been widely used in bone replacement. Hydroxyapatite is a bone graft material indicated with success in orthopedic, cranio-maxillofacial and dental surgeries. It is recommended for the repair of cranial base defects, spinal fusion and orthopedic applications, besides bone graft around dental implants and metal hip prostheses.

Properties

Origin: 100% synthetic.
Phase Purity
≥ 95%.
Porosity:
80% Overall porosity.
Interconnecting pore system ensures fast revascularization.

Resorption:
Long-Term volume stability.
Biocompatible.

Radiopaque
: Allows the monitorization of osteointegration.
Easy to handle.

 

 

HYDROXYAPATYT

The prices do not include VAT

37 EUR16032 od 0,90 do 1,00 mm0,5 g - 1,70 cc
37 EUR16033od 1,41 mm0,5 g - 1,50 cc
60 EUR16035 od 1,71 mm1,0 g - 2,60 cc

synthetic graft
BETA TCP

Description

Pure phase Beta tricalcium phosphate (ß-TCP) (Ca3(PO4)2) is a resorbable synthetic particulate ceramic made from Calcium Hydroxide (Ca(OH)2), Phosphoric Acid (H3PO4), with the proportion of Ca3(PO4)2 being 91.67% according to the X-Ray Diffraction test. It is used as matrix for bone tissue neoformation because, in terms of composition, it is identical to the bone matrix and allows the restoration of this tissue through the osteoconduction process.


Mode of Action

The first healing stage promotes the migration of vessels through porosities, followed by the migration of bone forming cells that suffer differentiation through contact with the mineral portion of the bone.


Indications

Beta TCP is a biomaterial used in bone graft procedures, and it is a synthetic bioceramic, elective for regenerative techniques in Periodontics, Implant Dentistry, Orthopedics or medical and dental surgery procedures that require bone neoformation. It can be used in the reconstruction of traumatic or degenerative bone wall defects, sinus floor elevation, periodontal or alveolar bone filling and osteotomies, as well as the site preservation and preparation. In medical procedures, it is used in orthopedics and traumatology cases such as correction of musculoskeletal tumors, spinal chord and cervical spine injuries.

 

Properties

Origin: 100% synthetic.
Phase Purity
≥ 95%.
Porosity:
Over 80%.
Gradually and completely resorbable.

 

 

 

BETA TCP

The prices do not include VAT

37 EUR 16057 od 0,10 do 0,50 mm0,5 g - 1,9 cc
72 EUR 16062 od 0,10 do 0,50 mm3 g - 11,5 cc

LEARN MORE

Membranes

dPTFE

See more

WSPÓŁPRACA: